NFS Shift: Import/Export filter (Updated 27 Feburary 2010)

ZModeler2-related discussion. General questions, howto, etc.

Moderators: Oleg, _RicH_

NFS Shift: Import/Export filter (Updated 27 Feburary 2010)

Postby Oleg » Thu Oct 15, 2009 8:43 am

NFS:Shift Import/Export filter in ZModeler v2.2.3.
This guide thread is for NFS Shift filter version 2.2.3 Build 259 and higher (supplied with ZModeler version 2.2.3 Build 970 and higher). ZModeler version is written in a caption of main window; filter version can be found in Options\Settings\Plugins\Manager window:
Image

Prepare your Shift game
You need to unpack Shift\Pakfiles\*.bff files with QuickBMS tool
http://aluigi.org/papers.htm#quickbms
using a script for unpacking:
http://aluigi.org/papers/bms/nfsshift.bms

This tool have to be run from command prompt. You can search the web for batch file for unpacking, if you are not familiar with command prompt. I don't have the game and can't provide you any other solution.

By unpacking files, your Shift game folder will get lots of other folders with really huge amount of files. You can modify Shift game shortcut to add "-loose" argument. It will force game to use files as is, instead of reading them from packed BFF files. It will take much longer to load game or race, but that's the only option for modding the game at the moment.


Importing models.
The filter will deal with binary vehicle definition files *.VHF.BML even thought game contains edtiable text version of these files (*.VHF). Thes files are laid in unpacked vehicle\_car_name_ folder. This folder contains binary geometry objects (*.MEB files) and material definitions too (*.BMT files), so filter will load them. Unfortunally, this folder does not contain textures, so you need to adjust filter settings properly. Pick File\Import in ZModeler and change File Type to "NFS Shift (*.vhf.bml; *.meb) in drop list. Configuration dialog box for the filter will appear in a bottom:
Image
You have to press button next to Unpacked Shift: and locate NFS:Shift game folder (folder with unpacked Shift files). Then you will see a folder location on the button (like on an image above). You need to specify folder only once.
Disable Bumpmap option will disable normal/bumpmap texture layer even thought according textures will be loaded and assigned to materials. It's preferable to tick this option ON.
Use Environment option will assign environment/reflection texture on materials, if they use it. Shift material definitions does not refer to specific environment texture, since real-time reflection maps are created. It's still preferable to use this option and load environment textures, since you might get improper shader configuration on export if you don't load environment textures. You can use the following texture as environment:
Image
(Right-click and save target image on your drive in a folder with commonly used textures. For example, it could be "C:\My Documents\Textures").
Model Name is a name of base model. Usually, it matches the folder you are importing from, but it's not a must. For example, when you import cockpit model (bmw_135_cockpit.vhf.bml file, Model Name should be set to bmw_135.
You can leave it blank when importing model from game folder. Press Import button to import model. You will get an error in a log window flaming Failed to locate preferable environment texture "chrome.dds". Adjust filter preference in profile editor. Pick in main menu Options\Settings\Profile\Editor, Locate a Preferences\Filters\EA NFS Shift branch and change EnvMap key entry to NFSEnvMap.bmp:
Image
Note, if you don't have these settings in profile editor, restart ZModeler.
Additionally, pick Services\Textures on a left side and add a path with your commonly used textures into a set of textures lookup paths:
Image
In my case it's a C:\Documents\Dev\Textures folder - the folder with common textures and it contains NFSEnvMap.bmp texture too.
Restart ZModeler so changes take effect. Now you can import model again and you will get proper model loaded with no warnings or errors:
Image


Scene model hierarchy and settings.
Scene root node matches model name: BMW_135. It's important that you give proper name to model on import, since it's used to truncate names of the rest of objects. For example, kit00_bonnet part actually was loaded from bmw_135_kit00_bonnet file. These part name are a grouping dummy node that contains dummies for "Level of Detail" (lod) models. In most of cases, there are two level of detail: high-quality and low-quality which have a _loda and _lodb indicators; some models could have very low detailed lod (_lodc). Finaly, under certain dummy nodes the phisical geometry mesh is located (kit00_bonnet_loda) which usually supplied with "damaged/deformed" version having _damage on a tail of name. Please, read Damaged Models paragraph below regarding damaged models;
Some objects that don't match common pattern "model name + part name" are imported as is and their name is given in square bracets. For example, you can see in a bottom of the list a part named [BMW_135I_MIRROR_L]. I don't know why it differs in name (BMW_135i), so I leave it as is. Object names in square braces are used as-is on export and not appended with model name in a begining.

Object Properties
NFS:Shift filter has it's own meaningful properties for an objects. It's important for cockpit models, while exterior models could be used as is. However, it's preferable to set Compatibility to NFS:Shift to see these properties. Pick in main menu Options\Settings\General and change Compatibility to NFS:Shift Compatibility:
Image
Now, right-click on any object, pick "Properties...", expand Genral\External State\NFS:Shift Compatibility and you will see an options that you can toggle for parts:
Image
Once again, these are meaninful for cockpit model only.


Flare Effects and Polygons ID
Flare Effects, as well as lighting-up headlights and taillight models are modelled as a single objects: one object for flare models, one object for the lights. It is remarkable, that you can smash fragments of lights ingame and certain flares should not light-up, as well as "shining" model of according head- or back-light should not be rendered. That is why, you have to assign proper ID on polygons of Flare effects and Light models. Each ID is meaningful for game engine and it will decide whether certain polygon should be rendered or not. Highlight a rear flare effect object (lightglows_r_loda), right-click and pick "Show Isolated". You will see it isolated from the rest of scene:
Image
You see that all flares are the only object. Switch it to polygons level, highlight any flare quad model, right-click on it and pick "Properties..." Notice, that General\External State\ID value could be different for certain polygons - these are distinguishing ID for game engine.
Image
These values and their meanings are:
1: Front Left Headlight
2: Front Right Headlight
3: Rear Left BrakeLight (bright, lights up when you hit brakes)
4: Rear Right BrakeLight (bright, lights up when you hit brakes)
5: Rear Left TailLight (not bright, lights constanly, when you drive in dusk)
6: Rear Right TailLight (not bright, lights constanly, when you drive in dusk)
7: Rear Left TailLight (same as 5, but very bright)
8: Rear Right TailLight (same as 6, but very bright)
9: Rear Left ReverseLight (bright reverse light)
10: Rear Right ReverseLight (bright reverse light)
11: Unknown
12: Middle/Center BrakeLight (bright, lights up when you hit brakes)

I have to notice here, that you should use these ID values on headlight and backlight models too, so game engine will brighten textures on according polygons when light effect is needed. In cooperation with flare effect it looks very realistic, while missing any of them will suffer realism.

Important note on Flare models: Flare model must use only QUAD polygons. The game will rotate this quad to the viewer. I can't say it works perfectly on exported model, but that's the best I could achieve so far.

Damaged Models
You can supply any visual part with Damaged version, but the game will use them where possible only. The most important thing on Damaged version is that you can deform only vertices of this mesh. Literally, you can only move them, but you can't modify geometry itself. To create proper damaged version, you should copy original model and move vertices as needed. Note, you can't even use Knife tools to make sharp edges, or weld or delete unused areas. I can't say it's quite easy to make accurate deformed model, but it's a question of practive.
Remark: Polygons of deformed/damaged part should have the same ID settings as original model, or you might get corrupt deformed model.

Wheel Tyre model
You might notice skeleton and some bones under each tire model. The tire model in Shift game does not spin when you drive, instead only uv-mapping rotates on model geometry. At the same time, bones could move a little to simulate tire deformation when you brake or make a hard turn. Unfortunally, UV rotation is not properly exported, so even thought proper bone-affected tyre model could be exported, it's appearence in game will be pretty odd. That is why you should backup original tyre model files and restore them after export. You should not use ZModeler-generated tyre models, but you can improve original tyres by changing textures if you like to.


Materials and Textures settings
NFS:Shift ending is shader-based and requires certain shader for any geometry before rendering; each shader requires explisit textures settings and quantity too. I strongly recommend to use original material and textures settings to get proper results. Even if certain material has several disabled texture layers, they are still meaningful for exporter.
Material name contains shader name to use and, if it differs, Shading Techinique in braces. For example, material bmw_135_rim wheels (Wheels_Opaque) will use shader wheels with technique Wheels_Opaque (no transparency), while material bmw_135_rim_blur Wheels will use the same shader Wheels with Technique Wheels. Shader name is written after material name and it's not case sencitive (e.g. "wheels" is the same as "Wheels"), since it's just a file name. Technique is written in braces and it's case sencitive.

There are lot of settings and Techniques combinations and they require proper texture settings. I can't describe all of them here, so I just supply Model Example Packs. Shader vehicle_basic with technique VehicleBasic is the most commonly used shader and it could suit your needs in most of cases.

You are allowed to specify additional settings for material in User-Defined options and in most of cases it's important to specify proper settings there. The list of keywords (and according values if required) follows:
VINYLS: Object support vinyls and require second UV channel for vinyls unwrap,
COCKPIT: Material is used in cockpit view: vinyls will be flipped if available,
SCRATCH: Scratches is supported by material. Usually appears with Bodywork shader.
CRACK: Cracks could appear on demaged models. Usually appears with Glass shader.
BLUR: Material has blurred textures to use on high speed ingame. Usually appears with Wheel shader.
DUST: Dust could appear on material ingame. Usually appears with Wheel shader.
LIGHT: A Condition-Light texture layer is available in material. This texture is applied as AddSmooth and requires game enging to decide whether it will shine or not. Usually appears with Wheel shader (disk glow effect) and vehicles_basic (VehicleBasic_AlphaTest) shader (for head/tail-light models).
BROKEN: Material has a texture with alpha-channel that will be enabled when model become deformed. Usually appears with (VehicleBasic_AlphaTest) shader for tail-light models.
ALCANTARA: I can't say it has certain effect in cockpit materials, but it appears on some of them.


Exporting Model
When you pick File\Export and specify File Type NFS:Shift (*.vhf.bml; *.meb), you can export entire scene (vehicle). The filter will generate all mesh files (MEB) and material files (MTX). Materials are exported in text format, so you can adjust them manually if required. It's important to specify model name on export, so files will be generated with proper names. For example, when exporting BMW_135 exterior model (bmw_135.vhf.bml file) or it's cockpit model to (bmw_135_cockpit.vhf.bml file), use bmw_135 as a model name. Scene root should contain bmw_135 dummy node in first case (vehicle) and cockpit dummy node in a second case. Note, if you export into new file (without overwrite), you should specify double extension as is: ".vhf.bml", since just ".bml" is not enough.

When you export entire vehicle model, you can add small comment, thumbnail image and (registered users only) could lock model. Locking will affect .vhf.bml file and all mesh geometry files (meb) that will be exported. Locked models can not be imported into ZModeler, so you should not lock your files unless you have a backup copy in .Z3D format!.

In most of cases, exported model is ready to use ingame (except tyre models as stated above), so you can launch the game and test results.


Example Model Pack
Since scene assembly and materials settings are quite complex in NFS:Shift, I supply Example Models Pack, that could be used as a reference material. It could be downloaded here:
[url=http://www.zmodeler2.com/files/example/nfs/shift/ShiftModelsPack.rar]
http://www.zmodeler2.com/files/example/ ... lsPack.rar
[/url]
Last edited by Oleg on Sun Feb 28, 2010 12:48 am, edited 4 times in total.
User avatar
Oleg
Site Admin
 
Posts: 7507
Joined: Fri Feb 06, 2004 3:54 am

Postby Chasez » Fri Oct 16, 2009 9:23 am

This filter works great :) I love it. Thanks Oleg.
User avatar
Chasez
Beginner
 
Posts: 248
Joined: Thu Jun 18, 2009 12:34 am

Postby mimi » Fri Oct 16, 2009 9:56 am

Good Work & Niiicee Filter
I finished "Nissan Skyline 2000GT-R" convert to GTASA

I love ther car 8)

http://blog-imgs-23.fc2.com/g/t/a/gtasa ... 003810.jpg

Thanks Oleg :D
mimi
 

Quick bms with bat file

Postby shadow » Sat Oct 17, 2009 5:07 pm

Quick bms with bat file can be found at bottom of this page http://www.nfsplanet.com/nfsshift_files.php?lang=eng
called "nfs shift unpacker".
Current status:
RaceGamer Modland Admin:http://heddly.com/
FOJ Admin: http://www.flatoutjoint.com/
GJ Admin: http://gridjoint.tk/
my xfire video's: http://www.xfire.com/video/b33b9/
shadow
 
Posts: 8
Joined: Sat Aug 22, 2009 6:33 pm
Location: Ontario, Canada

Postby MRick33 » Sun Oct 18, 2009 1:04 am

oK, thtat work perfectly now for me, import with all texture.


zmd2>>>>3DS amazing, perfect export all vertice and normals are correct and parts in her place, just flip some little parts like the wheels


so now let's go for a big RENDER session 8) 8) 8) 8) 8)


like this, Veyron NFS Undercover , render Vray.

Image
Attachments
captur10.jpg
MRick33
 
Posts: 5
Joined: Tue Nov 06, 2007 10:48 am

Postby Oleg » Sun Feb 28, 2010 12:55 am

** updated **. Read first post and get the latest ZModeler.
User avatar
Oleg
Site Admin
 
Posts: 7507
Joined: Fri Feb 06, 2004 3:54 am

car render

Postby white00gt » Mon Apr 05, 2010 5:27 pm

@MRICK33 that car looks amazing- love the wheels, any plans to release to public as an nfs shift mod?
white00gt
 

Postby Nirgal » Sat May 15, 2010 2:35 am

Thank you Oleg for the NFS Shift import filter. Great work!!

I have just install ZM2 2.2.4
I have download the "NFSEnvMap.bmp" from the link above, have follow the above instructions to configure ZM2, but i still have a problem for loading envmap.

Each time I import a model, i have this message:
Failed to locate preferable environment texture "NFSEnvMap.bmp".
How can I fix that?


@MRick33
How do you import from ZM2 to 3DSmax? I tried to export from ZM2 to a .3ds file and then import in 3dsmax, but i have a message "improper file format".
Nirgal
 
Posts: 3
Joined: Tue Dec 26, 2006 3:34 am
Location: France

Postby Oleg » Sat May 15, 2010 3:03 am

make sure texture is named exactly as it's stated in error message;
you should copy texture into a folder where zmodeler could locate a file. It could be in the same folder as the model you are importing.
you can open textures browser, load this texture manually and THEN import shift model.
User avatar
Oleg
Site Admin
 
Posts: 7507
Joined: Fri Feb 06, 2004 3:54 am

Postby Nirgal » Sat May 15, 2010 3:28 am

I have tried to do what you said.

"make sure texture is named exactly as it's stated in error message" --> checked, is the same name

"you should copy texture into a folder where zmodeler could locate a file. It could be in the same folder as the model you are importing. " --> same error message

"you can open textures browser, load this texture manually and THEN import shift model." --> The texture appear full white and the Audi S3 headlight are still invisible in ZM2.
Maybe my texture file have a problem (38 ko only and can't preview it in windows). I would like to download the NFSEnvMap.bmp again, but the link seems to be broken. Could you uplaod it again?
Nirgal
 
Posts: 3
Joined: Tue Dec 26, 2006 3:34 am
Location: France

Postby Oleg » Sat May 15, 2010 3:31 am

you can use any environment texture you like, just make sure to change filter settings in Options\Settings\Profile\Editor.... Preferences\Filters\NFS Shift\.

restart zmodeler; it will use texture that you specify for reflection layer.
User avatar
Oleg
Site Admin
 
Posts: 7507
Joined: Fri Feb 06, 2004 3:54 am

Postby Nirgal » Sat May 15, 2010 3:59 am

Ok, no more error message when using another environnement texture. Seems to be the NFSEnvMap.bmp the cause of my problem. Maybe there was a probleme when downloading NFSEnvMap.bmp.

Thank you Oleg. :D
Nirgal
 
Posts: 3
Joined: Tue Dec 26, 2006 3:34 am
Location: France

NFS SHIFT Exporter Filter problem.

Postby chevyopala » Thu Jul 29, 2010 7:10 am

Hello Oleg!

First I want to congratulate you on the excellent program that is ZModeler. I have done several conversions to Most Wanted with him. But my problem is with NFS SHIFT. To import it imports correctly, but when exporting to NFS SHIFT, presents some problems:

Cockpit:
- Instruments without feature, steering wheel and gearshift will not move.

External:
- Tires spin half forward and half back;
- Disc brakes "hits" when selecting the runway at dawn or dusk.

Note: I corrected these errors by copying the original files. MEB of the game, for the renaming. MEB that was generated by ZModeler and replacing them.

These same problems I checked that also happens with the sample template that is posted here in the forum (BMW 135). If you export and install the model exported to the game, will present these same problems as reported.

Below follows some pictures and a short video of the problems I'm reporting.

First with the following structure in ZModeler:
Image

ImageImageImageImageImage

Short video: http://www.youtube.com/watch?v=hxX_FSz66ic
_____________________________________________________________________
Second with the following structure in ZModeler:
Image

ImageImageImage

My Z3D and MOD File:
http://www.megaupload.com/?d=S4CAW12X
http://www.megaupload.com/?d=C62GNF0F

Thank you Oleg!
User avatar
chevyopala
 
Posts: 16
Joined: Thu Jul 15, 2010 8:17 am

Postby Toolieo » Mon Sep 13, 2010 4:33 am

Why does zmodeler always swap my rim shader around?

I am trying to use wheels_opaque but keeps making it Vehicles basic.

---------------------
"Performing autosave to "c:\users\User1\desktop\zmodeler 2.2.3/Autosave/Lambo SHIFT_autosave2.z3d"
Material "lamborghini_gallardo_wheel (Wheels_Opaque)" was forced to use shader "vehicles_basic:VehicleBasic".
Performing autosave to "c:\users\User1\desktop\zmodeler 2.2.3/Autosave/Lambo SHIFT_autosave3.z3d"
Material "lamborghini_gallardo_wheel (wheels_opaque)" was forced to use shader "vehicles_basic:VehicleBasic".
----------------------

I am new to modding it, TDU is way different to this. So if the answer is simple then woops. :wink:
Toolieo
 

Shadow

Postby Toolieo » Sun Sep 19, 2010 10:01 pm

Hello,

I managed to fix that shader issue, so ignore above post.

What ive noticed with the filter is when exported it doesn't create a full shadow anymore, even when compatibility mode for shift is turned on. All shadow boxes are correct and ticked.

All non imported cars have them (obviously) but soon as you import it into zmodeler then export there is no more shadow.


Image
Toolieo
 

Postby JU57FL1P » Fri Nov 26, 2010 7:00 am

Hi Oleg,
Could you make an export filten in which I could choose from vhf.bml, and ordinary VHF(xml based) ??
It would make it much easier...
JU57FL1P
 
Posts: 3
Joined: Thu Nov 18, 2010 8:00 am
Location: Estonia

Re: NFS SHIFT Exporter Filter problem.

Postby JU57FL1P » Fri Nov 26, 2010 7:02 am

hey chevyopala
wot did you make the steering wheel correct??
So that It turns, not going off the screen??
JU57FL1P
 
Posts: 3
Joined: Thu Nov 18, 2010 8:00 am
Location: Estonia

Postby zsl » Tue Nov 30, 2010 1:59 am

Hi, I have 3ds car model in zmodel2 imported all ok Object was not found for export to .meb,.bml
I have Registred version thx.
User avatar
zsl
 
Posts: 1
Joined: Mon Feb 09, 2009 4:06 am

Postby Oleg » Fri Dec 10, 2010 11:47 am

Nfs Shift Example pack - is the source of inspiration in a quest for proper export solution.
User avatar
Oleg
Site Admin
 
Posts: 7507
Joined: Fri Feb 06, 2004 3:54 am

Postby BBoyJmE » Wed Jan 05, 2011 5:32 am

Wow WOW WOW!!!! I havent touched my copy of Zmodeler 2 in around 1 year, i have been very busy and i gave up on putting my Concept car in GTA4 but i put my mind to finish it of being all i ahve to do is assign material ID's...


THEN! I come across this??? You can import cars into NFS Shift?? Are you being serious????

Links to where I can get started? and tips and so on?( Surely I mean besides this thread) My God! Just as I questioned myself earlier while Playing NFS Shift in my Recaro + G27 " Hmm what car game has a good rendring engine that is modable" And its SHIFT?!

Wow, Oleg, You are a Freak!! /hail!
BBoyJmE
 
Posts: 5
Joined: Sun Aug 16, 2009 8:40 am

Postby Toolieo » Thu Jan 13, 2011 5:20 am

Hello,

I have a question about rear lights. The ID's given for braking and the dusk lighting.

How would you combine both into 1? So when your driving midday the rear lights aren't turned on until you drive in dusk and so that way it also doesn't interfere with braking.
Toolieo
 

Postby El1iP3S01D » Mon Jan 17, 2011 6:39 pm

Folks, i have all the files for the Nissan R390 GT1 Road Car. My Question is this, when i import the model into Zmodeler; What do i do next? Do i save as .z3d file (which i did by the way) What else do i do so that i can use it on NFS Shift PC....
El1iP3S01D
 
Posts: 66
Joined: Sat Jan 15, 2011 2:50 pm
Location: Queens, NY USA

Postby El1iP3S01D » Tue Jan 18, 2011 9:19 pm

How do i tell Zmodeler to import .dds files? when ever i import an .obj file....
El1iP3S01D
 
Posts: 66
Joined: Sat Jan 15, 2011 2:50 pm
Location: Queens, NY USA

Postby serous_2010 » Sun Jan 30, 2011 1:45 pm

I have the same problem as Nirgal, whenever i try to export a model in .3ds an import it in 3ds max, i get an error "improper file format"
serous_2010
 

Postby Australian made » Sun Jan 30, 2011 10:42 pm

serous_2010 wrote:I have the same problem as Nirgal, whenever i try to export a model in .3ds an import it in 3ds max, i get an error "improper file format"


never ever ever, use 3ds for anything it's so outdated and useless that you will get nothing but problems, always use obj, for 2 reasons

1. it keeps the naming intact,
2. it keeps normals and smoothing

i could give you a heap more reasons but that is the best, if dont have latest zmodeler go buy it because it makes life a whole lot simpler when converting something from say shift for example to use in 3dsmax

hope this helps
Australian made
 
Posts: 19
Joined: Fri Feb 06, 2004 8:31 pm

Next

Return to ZModeler2 General Discussion

Who is online

Users browsing this forum: No registered users and 1 guest

cron