problem with template

SCS Software ATS and ETS2 editing using ZModeler3 filter. Models, Materials, Animation.

Moderators: Oleg, _RicH_

problem with template

Postby SpeedyJoe » Wed Jan 24, 2018 7:36 am

Hey, since the version of ets2 1.28+ I have a problem with the templat, whatever I do in ZM3 this template on the model is spoiled by what skins do not work. AO all the time works, but the template is not what's going on? My friend has the same problem.
SpeedyJoe
 
Posts: 2
Joined: Wed Jan 24, 2018 7:32 am

Re: problem with template

Postby Oleg » Wed Jan 24, 2018 1:31 pm

you should probably set DETAIL2 texture slot to use "Manual UV#3" before export.
User avatar
Oleg
Site Admin
 
Posts: 8058
Joined: Fri Feb 06, 2004 3:54 am

Re: problem with template

Postby SpeedyJoe » Thu Jan 25, 2018 6:15 am

But this made with the scs models.... all I need to do is remove the flare from registration and immediately the whole mapping falls
SpeedyJoe
 
Posts: 2
Joined: Wed Jan 24, 2018 7:32 am

Re: problem with template

Postby Oleg » Thu Jan 25, 2018 11:40 am

mapping does not fail. material get configured improperly on export, as default DETAIL2 config is UV#2, while most of latest scs models use UV#3 too. Setting DETAIL2 to UV#3 will give correct material on export.
User avatar
Oleg
Site Admin
 
Posts: 8058
Joined: Fri Feb 06, 2004 3:54 am


Return to ATS and ETS2 by SCS Software

Who is online

Users browsing this forum: No registered users and 1 guest